Dendritic boron and nitrogen doped high-entropy alloy porous carbon fibers for high-efficiency hydrogen evolution reaction.

Among various electrocatalysts, high-entropy alloys (HEAs) have gained significant attention for their unique properties and excellent catalytic activity in the hydrogen evolution reaction (HER). However, the precise synthesis of HEA catalysts in small sizes remains challenging, which limits further improvement in their catalytic performance. In this study, boron- and nitrogen-doped HEA porous carbon nanofibers (HE-BN/PCNF) with an in situ-grown dendritic structure were successfully prepared, inspired by the germination and growth of tree branches. Furthermore, the dendritic fibers constrained the growth of HEA particles, leading to the synthesis of quantum dot-sized (1.67 nm) HEA particles, which also provide a pathway for designing HEA quantum dots in the future. This work provides design ideas and guiding suggestions for the preparation of borated HEA fibers with different elemental combinations and for the application of dendritic nanofibers in various fields.

Rationally designing of Co-WS2 catalysts with optimized electronic structure to enhance hydrogen evolution reaction.

Designing and developing cost-effective, high-performance catalysts for hydrogen evolution reaction (HER) is crucial for advancing hydrogen production technology. Tungsten-based sulfides (WSx) exhibit great potential as efficient HER catalysts, however, the activity is limited by the larger energy required for water dissociation under alkaline conditions. Herein, we adopt a top-down strategy to construct heterostructure Co-WS2 nanofiber catalysts. The experimental results and theoretical simulations unveil that the work functions-induced built-in electric field at the interface of Co-WS2 catalysts facilitates the electron transfer from Co to WS2, significantly reducing water dissociation energy and optimizing the Gibbs free energy of the entire reaction step for HER. Besides, the self-supported catalysts of Co-WS2 nanoparticles confining 1D nanofibers exhibit an increased number of active sites. As expected, the heterostructure Co-WS2 catalysts exhibit remarkable HER activity with an overpotential of 113 mV to reach 10 mA cm-2 and stability with 30 h catalyzing at 23 mA cm-2. This work can provide an avenue for designing highly efficient catalysts applicable to the field of energy storage and conversion.

Preparation and Peculiar Magnetic Properties at Low Temperatures of La1.85Sr0.15CuO4 Nanofibers.

Herein, the preparation process, morphology, structure, and magnetic properties of La1.85Sr0.15CuO4 (LSCO) cobweb-like nanofibers are reported. LSCO nanofibers with a regular grain size distribution are successfully prepared via electrospinning, followed by calcination. We conducted morphology analysis and elemental distribution using electron microscopy and energy-dispersive X-ray spectroscopy (EDS), respectively. Additionally, magnetic property testing was performed using a vibrating sample magnetometer (VSM) to confirm the superconducting properties of the samples. Interestingly, our samples exhibited a superconducting transition temperature, Tc, of 25.21 K, which showed some disparity compared to similar works. Furthermore, we observed a ferromagnetic response at low temperatures in the superconducting nanofibers. We attribute these phenomena to the effects generated by surface states of nanoscale superconducting materials.

Oxygen Vacancy-Enhanced Centrosymmetric Breaking of SrFeO3- x for Piezoelectric-Catalyzed Synthesis of H2O2.

Normally, only noncentrosymmetric structure of the materials can potentially be piezoelectric. Thus, it is limited in the field of piezoelectricity for the centrosymmetric structure of the material. In this work, the performance of piezoelectricity is successfully achieved from centrosymmetric SrFeO3- x by modulating oxygen vacancies, which have a surface piezoelectric potential up to 93 mV by using Kelvin-probe force microscopy (KPFM). Moreover, the piezoelectric effects of SrFeO3- x are also evaluated by piezoelectric catalytic effect and density functional theory calculations (DFT). The results show that the piezo-catalytic degradation of tetracycline reaches 96% after 75 min by ultrasonic mechanical vibration and the production of H2O2 by SrFeO3- x piezoelectric synthesis could reach 1821 µmol L-1. In addition, the DFT results indicate that the intrinsic effect of oxygen vacancies effectively promotes the adsorption and activation of O2 and H2O as well as intermediates and improves the piezoelectric catalytic activity. This work provides an effective basis for realizing the piezoelectricity of centrosymmetric materials and regulating the development of piezoelectric catalytic properties.

In-situ electrospinning with precise deposition of antioxidant nanofiber facial mask loaded with Enteromorpha prolifera polysaccharides.

In order to fabricate a novel antioxidant nanofiber facial mask, a metal cone modified in-situ electrospinning with precise deposition was employed by utilizing Enteromorpha prolifera polysaccharides (EPPs). The metal cone could control the deposition area to achieve precise fabrication of facial mask on skin. The EPPs exhibited remarkable antioxidant ability, as evidenced by the half-maximal inhibitory concentrations (IC50) of 1.44 mg/mL and 0.74 mg/mL against DPPH and HO• free radicals, respectively. The antioxidant ability of the facial mask was improved by elevating the electrospinning voltage from 15 kV to 19 kV, due to the improved release capacity of EPPs by 7.09 %. Moreover, the facial mask demonstrated robust skin adhesion and moisture-retaining properties compared with commercial facial mask, which was benefited by the in-situ electrospinning technology. Furthermore, cytotoxicity assay, animal skin irritation test, and ocular irritation test collectively affirmed the safety of the facial mask. Thus, this research introduces a novel in situ electrospinning with precise deposition method and a natural antioxidant additive for preparing facial mask.

Electrospun Cellulose Nanocrystals Reinforced Flexible Sensing Paper for Triboelectric Energy Harvesting and Dynamic Self-Powered Tactile Perception.

The technical synergy between flexible sensing paper and triboelectric nanogenerator (TENG) in the next stage of artificial intelligence Internet of Things engineering makes the development of intelligent sensing paper with triboelectric function very attractive. Therefore, it is extremely urgent to explore functional papers that are more suitable for triboelectric sensing. Here, a cellulose nanocrystals (CNCs) reinforced PVDF hybrid paper (CPHP) is developed by electrospinning technology. Benefitting from the unique effects of CNCs, CPHP forms a solid cross-linked network among fibers and obtains a high-strength (25 MPa) paper-like state and high surface roughness. Meanwhile, CNCs also improve the triboelectrification effect of CPHP by assisting the PVDF matrix to form more electroactive phases (96% share) and a higher relative permittivity (17.9). The CPHP-based TENG with single electrode configuration demonstrates good output performance (open-circuit voltage of 116 V, short-circuit current of 2.2 µA and power density of 91 mW m-2 ) and ultrahigh pressure-sensitivity response (3.95 mV Pa-1 ), which endows CPHP with reliable power supply and sensing capability. More importantly, the CPHP-based flexible self-powered tactile sensor with TENG array exhibits multifunctional applications in imitation Morse code compilation, tactile track recognition, and game character control, showing great prospects in the intelligent inductive device and human-machine interaction.

Constructing CoO/Mo2 C Heterostructures with Interfacial Electron Redistribution Induced by Work Functions for Boosting Overall Water Splitting.

Space charge transfer of heterostructures driven by the work-function-induced built-in field can regulate the electronic structure of catalysts and boost the catalytic activity. Herein, an epitaxial heterojunction catalyst of CoO/Mo2 C with interfacial electron redistribution induced by work functions (WFs) is constructed for overall water splitting via a novel top-down strategy. Theoretical simulations and experimental results unveil that the WFs-induced built-in field facilitates the electron transfer from CoO to Mo2 C through the formed "Co─C─Mo" bond at the interface of CoO/Mo2 C, achieving interfacial electron redistribution, further optimizing the Gibbs free energy of primitive reaction step and then accelerating kinetics of hydrogen evolution reaction (HER). As expected, the CoO/Mo2 C with interfacial effects exhibits excellent HER catalytic activity with only needing the overpotential of 107 mV to achieve 10 mA cm-2 and stability for a 60-h continuous catalyzing. Besides, the assembled CoO/Mo2 C behaves the outstanding performance toward overall water splitting (1.58 V for 10 mA cm-2 ). This work provides a novel possibility of designing materials based on interfacial effects arising from the built-in field for application in other fields.

MXene@Hydrogel composite nanofibers with the photo-stimulus response and optical monitoring functions for on-demand drug release.

The photo-stimulus response has the advantage of non-invasiveness, which could be used to control the "on" and "off" of drug release achieving on-demand release. Herein, we design a heating electrospray during electrospinning to prepare photo-stimulus response composite nanofibers consisting of MXene@Hydrogel. This heating electrospray enables to spray MXene@Hydrogel during the electrospinning process, and the hydrogel is uniformly distributed which cannot be achieved by the traditional soaking method. In addition, this heating electrospray can also overcome the difficulty that hydrogels are hard to be uniformly distributed in the inner fiber membrane.The "on" and "off" state of drug release could be controlled by light. Not only near infrared (NIR) light but also sunlight could trigger the drug release, which could benefit outdoor use when cannot find NIR light. Evidence by hydrogen bond has been formed between MXene and Hydrogel, the mechanical property of MXene@Hydrogel composite nanofibers is significantly enhanced, which is conducive to the application of human joints and other parts that need to move. These nanofibers also possess fluorescence property, which is further used to real-time monitor the in-vivo drug release. No matter the fast or slow release, this nanofiber can achieve sensitive detection, which is superior to the current absorbance spectrum method.

Enhanced Visible-Photocatalytic Activities in Strong Acids and Strong Alkalis of Flexible Iron-SrTiO3 Nanofibrous Membranes.

Traditional SrTiO3 (STO) materials have high brittleness and poor deformation resistance. In this work, macroscopically flexible iron-doped SrTiO3 (SFTO) nanofibrous membranes were prepared by electrospinning and calcination, which can be easily isolated and can maintain integrity to recycle as photocatalysts. Moreover, the SFTO nanofibrous membranes showed enhanced photocatalytic performance under strong acids (pH = 2) and strong alkalis (pH = 12). The SFTO nanofibrous membranes increased the catalytic rate of Congo red (CR) dye by about 10 times in visible light. The mechanism of photocatalytic activity enhancement was discussed by the combined effects of hydroxyl radicals and superoxide radicals. The successful preparation of SFTO nanofibrous membranes has offered a simple and economical approach to photocatalysis as well as environmental remediation.

Acid and alkali-resistant fabric-based triboelectric nanogenerator for self-powered intelligent monitoring of protective clothing in highly corrosive environments.

The corrosion of materials severely limits the application scenarios of triboelectric nanogenerators (TENGs), especially in laboratories, chemical plants and other fields where leakage of chemically corrosive solutions is common. Here, we demonstrate a chemical-resistant triboelectric nanogenerator (CR-TENG) based on polysulfonamide (PSA) and polytetrafluoroethylene (PTFE) non-woven fabrics. The CR-TENG can stably harvest biological motion energy and perform intelligent safety protection monitoring in a strong corrosive environment. After treatment with strong acid and alkali solution for 7 days, the fabric morphology, diameter, tensile properties and output of CR-TENG are not affected, showing high reliability. CR-TENG integrated into protective equipment can detect the working status of protective equipment in real time, monitor whether it is damaged, and provide protection for wearers working in high-risk situations. In addition, the nonwoven-based CR-TENG has better wearing comfort and is promising for self-powered sensing in harsh environments.

Superhydrophobic aerogel blanket with magnetic and solar heating effect enables efficient continuous cleanup of highly viscous crude oil.

Rapid cleanup of highly-viscous oil spills the sea is eagerly desired while still remains a great challenge. Hydrophobic and lipophilic adsorbents are regarded as ideal candidate for oil spill remediation. However, traditional adsorbents are not suitable for viscous crude oil, which would block the porous structure and lead to poor adsorption efficiency. In this work, a non-contact responsive superhydrophobic SiO2 aerogel blankets (SAB) with excellent magnetic and solar heating effect for efficient removal of viscosity oils under harsh environments was developed, via assembled MXene and Fe3O4/polydimethylsiloxane layer-by-layer along the SAB skeleton (Fe3O4/MXene@SAB). The Fe3O4/MXene@SAB exhibited excellent compression tolerance (compression stress 70.69 kPa), superhydrophobic performance (water contact angle 166°), and corrosion resistance (weak acid/strong base). Due to high water repellency and stable porous structure, the Fe3O4/MXene@SAB could successfully separate oil-water mixture, while with remarkable separation flux (1.50-3.19 × 104 L m-2 h-1), and separation efficiency (99.91-99.98 %). Furthermore, the responsive Fe3O4/MXene@SAB also showed outstanding magnetic-heating and solar-heating conversion efficiency, which could continuously separate high viscosity crude oil from seawater by pump even under relatively low magnetic fields and mild sun. The superhydrophobic blankets hold great promise for efficient treatment of heavy oil spills.

Stretchable, flexible and breathable polylactic acid/polyvinyl pyrrolidone bandage based on Kirigami for wounds monitoring and treatment.

Chronic wounds are slow to recover. During treatment, the dressing needs to be removed to check the recovery status, a process that often results in wound tears. Traditional dressings lack stretching and flexing properties and are not suitable using on wounds in joints, which require movement from time to time. In this study, we present a stretchable, flexible and breathable bandage consisting of three layers, including Mxene coating on the top, the polylactic acid/polyvinyl pyrrolidone (PLA/PVP) layer designed as Kirigami in the middle, and the f-sensor at the bottom. By the way, the f-sensor is in contact with the wound sensing real-time microenvironmental changes due to infection. When the infection intensifies, the Mxene coating at the top is utilized to enable anti-infection treatment. And Kirigami structure of PLA/PVP ensures that this bandage has stretchability, bendability, and breathability. The stretch of the smart bandage increases to 831 % compared to the original structure, and the modulus reduces to 0.04 %, which adapts extremely well to the movement of the joints and relieves the pressure on the wound. This monitoring-treatment closed-loop working mode, eliminating the need to remove dressings and avoid tissue tearing, shows a promising capability in the field of surgical wound care.

Formation of low-density electrospun fibrous network integrated mesenchymal stem cell sheet.

Cell sheets combined with electrospun fibrous mats represent an attractive approach for the repair and regeneration of injured tissues. However, the conventional dense electrospun mats as supportive substrates in forming "cell sheet on fiber mat" complexes suffer from problems of limiting the cellular function and eliciting a host response upon implantation. To give full play to the role of electrospun biomimicking fibers in forming quality cell sheets, this study proposed to develop a cell-fiber integrated sheet (CFIS) featuring a spatially homogeneous distribution of cells within the fiber structure by using a low-density fibrous network for cell sheet formation. A low-density electrospun polycaprolactone (PCL) fibrous network at a density of 103.8 ± 16.3 µg cm-2 was produced by controlling the fiber deposition for a short period of 1 min and subsequently transferred onto polydimethylsiloxane rings for facilitating cell sheet formation, in which rat bone marrow-derived mesenchymal cells were used. Using a dense electrospun PCL fibrous mat (481.5 ± 7.5 µg cm-2) as the control, it was found that cells on the low-density fibrous network (L-G) exhibited improved capacities in spreading, proliferation, stemness maintenance and matrix-remodeling during the process of CFIS formation. Structurally, the CFIS constructs revealed strong integration between the cells and the fibrous network, thus providing excellent cohesion and physical integrity to enable strengthening of the formed cell sheet. By contrast, the cell sheet formed on the dense fibrous mat (D-G) showed a two-layer (biphasic) structure due to the limitation of cellular invasion. Moreover, such engineered CFIS was identified with enhanced immunomodulatory effects by promoting LPS-stimulated macrophages towards an M2 phenotype in vitro. Our results suggest that the CFIS may be used as a native tissue equivalent "cell sheet" for improving the efficacy of the tissue engineering approach for the repair and regeneration of impaired tissues.

Icy core-shell composite nanofibers with cooling, antibacterial and healing properties for outdoor burns.

Burns are usually difficult to treat because their susceptibe to bacterial infections. When burns is accompanied by hyperthermia, the heat accumulated on the skin will causes extensive tissue damage. Most dressings focus on the treatment process, while ignoring the first-aid treatment to remove hyperthermia. To make matters worse, when outdoors, it is hard to find clean water to wash and cool the burned area. A dressing which can simultaneously realize first-time cooling and repairing treatment of the burned area can shorten treatment time, and is especially beneficial for outdoor use. In this study, a handheld coaxial electrospinning device is developed for preparing platelet-rich plasma @Polycaprolactone-epsilon polylysine (PRP@PCL/ε-PL) core-shell nanofibers. The nanofibers can be synchronously transformed into ice fibers during the spinning process, and directly deposited on the skin. The whole process is convenient to use outdoor. Via dual cooling mechanisms, first aid can take away the excessive heat in the burn area by nanofibers. These core-shell nanofibers also show its excellent antimicrobial and tissue regeneration-promoting properties. Therefore, it achieves first-time cooling and repair treatment of the burned area at the same time. Moreover, due to direct in-situ deposition of this handheld coaxial electrospinning, better antimicrobial properties, and faster healing performance are achieved. By using this integrated strategy that combines cooling, antibacterial and healing promotion, the burn recovery time is shortened from 21 days to 14 days.

Insulator polymers achieve efficient catalysis under visible light due to contact electrification.

Under the limitation of the carrier yield and mobility of semiconductor photocatalysts and the reaction domain, it seems that the photocatalytic efficiency cannot be greatly improved. Here, an efficient contact-electro-catalysis (CEC) system based on droplet triboelectric nanogenerator (TENG) is developed. Instead of using traditional semiconductor catalysts, the electric charge transferred during the electrification process of the contact between water droplets and polytetrafluoroethylene (PTFE) is used to participate in catalysis, and the output electrical signal can also monitor the degree of catalysis. The important role of light in the circulation of this CEC system is studied and discussed for the first time. It is proved that the contact electrification at the liquid-solid interface is accompanied by the generation of a large number of strong oxidizing radicals. The efficient transport of charge carriers driven by mechanical force and the active oxygen species distributed in the whole domain greatly improve the degradation rate of dyes. The experimental data show that the degradation efficiency of crystal violet (CV) reaches 90% within 38 s, and the rate constant k is as high as 3.7 min-1. This is a breakthrough in the field of catalysis.

Superhydrophobic nanofibrous sponge with hierarchically layered structure for efficient harsh environmental oil-water separation.

Oil leakage has posed serious threat to the environment, but still remain a great challenge to be solved especially for harsh environmental conditions. Herein, robust superhydrophobic nickel hydroxide grown by hydrothermal method and stearic acid modification on a blow-spun polyacrylonitrile (PAN)/Al2O3 nanofibrous sponge was proposed, so that the nickel hydroxide-modified polyacrylonitrile sponge (NPAS) was successfully obtained for efficient oil-water separation. The porous NPAS with a distinctive hierarchically layered structure, which exhibited excellent separation efficiency and mechanical elasticity. Due to its superhydrophobic and high porosity, the absorption capacity of NPAS could reach as high as 45 g g-1. It could not only separate a series of oil-water mixture with a high steady flux of 12,413 L m-2 h-1 (dichloromethane-water), but also separate stabilized emulsions with a superior flux 2032 L m-2 h-1 (water-in-dichloromethane) under gravity, all of that with above 99.92% separation efficiencies, which was higher than that of the most reported sponges. Most importantly, its strong acid/alkali resistance enable it is suitable for hazardous materials treatment applications in harsh environmental conditions. This novel NPAS via facile large-scale blow-spinning provide an efficient strategy for oil-containing wastewater treatment and environmental protection.

Cool and hot chitosan/platelet-derived growth factor nanofibers for outdoors burns.

Burns and scalds are thermal injuries caused by a large amount of heat accumulation in local tissues. The first cooling emergency is a key step. However, it is hard that in outdoors to find clean water to cool the scald tissue sites. Moreover, most dressings are concentrated on the treatment process today, neglecting the emergency treatment of temperature reduction. In this study, we imported refrigeration in the electrospinning process while using dirty water, rainwater and even urine of outdoors, so that the cooled sterile fibers were directly deposited on the burn and scald wounds, and the cooling emergency was achieved through the dual cooling mechanism. Since this fiber which is made up of cheap fish gelatin contains CuS adopting the green method, it can generate heat and effectively kill bacteria under the irradiation of an illumination lamp at the front end of a spinning device. As a result of the direct deposition, there is an excellent fit between the fibrous membrane and the skin, which reduces the air gap to achieve a better and quick cooling and heating effects. On the same Chitosan/Platelet-derived Growth Factor fiber membrane, this method of cooling first and heating second can shorten the recovery time from 30 days to 21 days. Thus, this treatment strategy has a great potential application prospect in the field of outdoor burn treatment.

The High Flux of Superhydrophilic-Superhydrophobic Janus Membrane of cPVA-PVDF/PMMA/GO by Layer-by-Layer Electrospinning for High Efficiency Oil-Water Separation.

A simple and novel strategy of superhydrophilic-superhydrophobic Janus membrane was provided here to deal with the increasingly serious oil-water separation problem, which has a very bad impact on environmental pollution and resource recycling. The Janus membrane of cPVA-PVDF/PMMA/GO with opposite hydrophilic and hydrophobic properties was prepared by layer-by-layer electrospinning. The structure of the Janus membrane is as follows: firstly, the mixed solution of polyvinylidene fluoride (PVDF), polymethylmethacrylate (PMMA) and graphene oxide (GO) was electrospun to form a hydrophobic layer, then polyvinyl alcohol (PVA) nanofiber was coated onto the hydrophobic membrane by layer-by-layer electrospinning to form a composite membrane, and finally, the composite membrane was crosslinked to obtain a Janus membrane. The addition of GO can significantly improve the hydrophobicity, mechanical strength and stability of the Janus membrane. In addition, the prepared Janus membrane still maintained good oil-water separation performance and its separation efficiency almost did not decrease after many oil-water separation experiments. The flux in the process of oil-water separation can reach 1909.9 L m-2 h-1, and the separation efficiency can reach 99.9%. This not only proves the separation effect of the nanocomposite membrane, but also shows its high stability and recyclability. The asymmetric Janus membrane shows good oil-water selectivity, which gives Janus membrane broad application prospects in many fields.

A nanofiber hydrogel derived entirely from ocean biomass for wound healing.

Crustaceans and fish scales in the marine food industry are basically thrown away as waste. This not only wastes resources but also causes environmental pollution. While reducing pollution and waste, biological activity and storage of materials are urgent issues to be solved. In this study, by first preparing dry fibers and then making hydrogels, we prepared a fish scale/sodium alginate/chitosan nanofiber hydrogel (FS-P) by cross-linking the nanofibers in situ. From fish and other organisms, fish gelatin (FG), collagen and CaCO3 were extracted. Fish scale (FS)/sodium alginate/chitosan nanofibers were cross-linked with copper sulfide nanoparticles prepared by a one-step green method to obtain FS-P nanofiber hydrogels under mild conditions without catalyst and additional procedures. These fiber hydrogels not only have good tissue adhesion and tensile properties, but also have the antibacterial effect of natural antibacterial and CuS photothermal synergism, which can achieve 51.32% and 49.96% of the antibacterial effect against Staphylococcus aureus and Escherichia coli respectively, avoiding the generation of superbacteria. The nanofiber hydrogels have 87.56% voidage and 52.68% degradability after 14 days. The combined strategy of using marine bio-based fibers to prepare gels promoted angiogenesis and tissue repair.

Recent progress and challenges in solution blow spinning.

In the past 30 years, researchers have worked towards reducing the size of ordinary three-dimensional (3D) materials into 1D or 2D materials in order to obtain new properties and applications of these low-dimensional systems. Among them, functional nanofibers with large surface area and high porosity have been widely studied and paid attention to. Because of the interesting properties of nanofibers, they find extensive application in filtration, wound dressings, composites, sensors, capacitors, nanogenerators, etc. Recently, a variety of nanofiber preparation methods such as melt blowing, electrospinning (e-spinning), centrifugal spinning and solution blow spinning (SBS) have been proposed. This paper includes a brief review of the fundamental principles of the preparation of nanofibers for solution jet spinning, the influence of experimental parameters, and the properties and potential applications of the solution-blown fibers. And the industrialization and challenges of SBS are also included.